Paul – just hit up any Golfsmith or Golf Galaxy in town and they all carry the epoxy. Want to hide this ad? Edited by GoinLo, 02 April – Can’t get a FF shot until someone records me. Fall colors pre peak. Checked and no weights in the shafts when pulled. Did you clear the vent hole on the grip to allow the air passing through when you seat the new shaft in?
|Date Added:||12 October 2004|
|File Size:||67.13 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Decide what you need to repair. Why Torch over gun for you?
March 25, Last active: If not, please start a new rexhaft. But with graphite at least, don’t let any direct heat hit the shaft, or it will melt! I also have rifle 6.
DIY: Golf Club Repair | Golfweek
This thread is days old. Is Die Hard a Christmas Movie. Posted January 8, Advertise with us Privacy Terms.
Then, with a wire drill bit, ream out the insides of the hosels until they diiy rough. Cut the shafts to the proper length. The shaft is clear of foreign objects inside. Really appreciate all of the insight guys. You don’t need to remove the grip if this is confirmed.
DIY shaft pulling/replacing – Clubs, Grips, Shafts, Fitting – The Sand Trap .com
Just not much golf to talk about with the feet of snow on the ground. Anybody have any tips?
Can’t wait to golf in Hawaii come March!!! Luckily that part got cut off. Insert the shaft into the hosel of your replacement head and twist it to be sure the epoxy covers both. Cover the area where the grips will be placed with double-sided tape, then soak it with the grip solvent.
IF you don’t have all of those, you are not ready to do some Re-shafting by yourself. As far as putting them back together it’s pretty simple, as with any DIY project prep work is very important.
Replacing graphite shafts – heat gun – epoxy – round wire brush – sand paper – selfmade shaft puller about 10,- – 15,- To cut the graphite shafts, I’d suggest a fine hacksaw again, works really well. Irons and wedges are pretty easy assuming everything is steel.
DIY: Golf Club Repair
Posted March 21, The first Golfworks article will work nicely for you. The new shaft is seated properly.
DIY Iron Reshaft Issue
What do you mean by this and what is the original shaft? Originally Posted by Gioguy21 Aright, here’s the deal: Register a new account.
I’ve never looked for it, is it easy to find? Nice when you realize you didn’t align the spine properly.